"We Service and Repair All Models of Air Conditioners. Residential and Commercial."
• Free Second Estimates • Financing Available • Service Maintenance Contracts Available
AC Supervisor Jimmy Jeans has twenty-three years experience in air conditioning installation and problem diagnosis	"Our job is to ensure that our customers have a comfortable home heating and air conditioning system that provides clean air, with efficient and a low environmental impact. "Our field service men are trained to evaluate the Freon circulation and electrical functions of your cooling system and make the adjustments to keep it running at peak efficiency. "We strive to be a reliable friend. We are someone who comes when ever you have an Air Conditioning or heating problem."

To get the longest life and greatest efficiency from your heating & A/C system is change the air filters every month.

We are Factory Authorized Carrier Dealers

What maintenance can I do myself? 
With the proper maintenance and care, your Carrier equipment will operate economically and dependably. There are a few simple, routine maintenance operations you can do to help ensure the best performance and comfort from your system.

Safety First
Before you perform any kind of maintenance, consider these important safety precautions.  Disconnect all electrical power to the unit before removing access panels to perform maintenance. Please note that there may be more than one power connection switch.

Routine Maintenance
Check the air filter in your furnace or fan coil every 3 to 4 weeks. A dirty filter will cause excessive strain on your furnace, air conditioner or heat pump. Replace your filter when necessary, or clean it if you have the reusable type. (If you have a reusable filter, make sure it’s completely dry before you re-install it.) The prefilter and collection cells of an electronic air cleaner should be cleaned at least two or three times per year.
Clean dust off of your indoor coil. With a vacuum cleaner and soft-brush attachment, you can remove any dust from the top and underside of the coil. Make sure you only do this when the coil is dry. If you can’t get the coil clean this way, call your dealer for service.
Keep your outdoor condensing unit free of debris. If you keep grass clippings, leaves, shrubbery and debris away from your outdoor unit, it should only require minimal care to operate properly. Check the base pan (under the unit) occasionally and remove debris, to help the unit drain correctly.  If the outdoor coil becomes dirty, use a brush or a vacuum cleaner with a soft brush attachment to clean the surface. To clean dirt that is deep in the coil, contact your dealer.
Make sure your outdoor unit stays in a level position. If the support for your split-system outdoor unit shifts or settles and the unit is no longer level, re-level it promptly to make sure moisture drains properly out of the unit. If you notice that water or ice collects beneath the unit, arrange for it to be drained away from the equipment.
Inspect your furnace’s combustion area and vent system before each heating season. If you find dirt, soot or rust, your system may not operate properly or at its peak efficiency. Call your servicing dealer and do not operate your furnace until it is professionally inspected and/or repaired.
Have oil-fired boilers inspected annually. Call your servicing dealer before each heating season to replace your oil filter cartridge and conduct a thorough inspection of the unit’s operation.
Clean your humidifier at the beginning of every heating season. Review your owner’s manual for the proper procedure to clean the external and internal components of your unit. The evaporator pad should also be replaced before each heating season. If the water in your area is hard or has high mineral content, you may need to clean or service your humidifier more frequently.

The days of air conditioners lasting 20 years are gone.
A typical A/C system has two heat exchangers  — an evaporator coil, usually found in the attic, and a compressor coil inside of the outside unit. These work together in conjunction with the freon circulation system to remove heat from your home.

In earlier days of refrigeration technology, the heat exchangers were built with thick walled copper. The welds could stand up to 20 years of rapid expansion and contraction from extreme temperature changes. Those were also the days of low energy costs.

In these times, rightfully, government pressure is on equipment manufacturers to create systems of greater efficiently and higher heat transfer capabilities. The industry is responding magnificently with major advancements in energy consumption efficiently every few years. However, much of the efficiently comes from developing heat exchangers with thinner walls that are made from more sophisticated metal alloys, and their welds just don’t last as long.

The good news is, while systems wear out and have to be replaced more frequently, the replacement systems are so much more efficient that they usually can pay for themselves in energy savings over the cost to operate the older system.

We believe that the Carrier Puron system is has the most energy efficient technology on the market today, and will remain the leader for years to come.
Keep Temperature set at constant level to reduce energy consumption and undue wear on the whole system.

Prevention is Better than Cure.
Please consider our Annual Planned Service Agreement for your Heating and Air Conditioning System.

Only  $150
The Southwest AC & Plumbing Service and Maintenance Agreement includes twice yearly maintenance on Your System.

Maintenance Agreement Partners get:

• Two maintenance calls per year. (One in the fall to prep your furnace and one in the spring to prep your Air Conditioner.)

• 10 % discount on component parts (Fans, Capacitors, etc.)

• 24 Hour Emergency Call-out preference with no overtime labor charges. 

Fall Furnace Service:
1. Wash condenser coil
2. Check filter
3. Check electrical connections
4. Check voltage
5. Check amperage
6. Check airflow
7. Check superheat
8. Check contactor
9. Check blower
10. Check Temp. Differential
11. Check capacitor
12. Check drains
13. Check belts
14. Check freon
15. Check bearing

Spring A/C Service:

1. Check safety controls
2. Check bearings
3. Lubricate parts as required
4. Check burners
5. Check electrical controls
6. Check filters
7. Check heat exchanger
8. Check belts
9. Check gas pressure
10. Check flue
11. Evaluate ducts
12. Check voltage
13. Check capacitors
14. Check return air
15. Check motor amps